Room Safe Instructions

Welcome to your room safe! These safe’s can only have one code at a time. If you happen to forget your code, we have a master key designated for your room that only a manager has access to and is strictly enforced. Your code can be a minimum of 1 and a maximum of 8 characters, we highly recommend using a code with at least 3 digits. Set your code:

  • Step 1 – Open the safe
  • Step 2 – Think of a code you will remember and write it down if needed. After your new code, you will need a “#” symbol (ex. _ _ _ _ _#)
  • Step 3 – locate and press the green “Learn/Reset” button on the door hinge
  • Step 4 – Once the yellow indicator light flashes and beeps twice, you are ready to enter your safe code. The yellow indicator light will remain on while you enter your code.
  • Step 5 – Ensure the yellow indicator flashes and beeps twice to confirm your code was accepted

 

*If the yellow indicator light flashes 5 times and remains on, your code has been rejected and you will need to try a new one. Follow steps 2-5 again

Confirm Code before locking:

– After completing steps 1-5, test your new combination, with the safe door open!

  • Enter your new combination
  • Once the green lights flash, turn the dial clockwise to retract locking bolts
  • Your safe is now programmed and ready for use
 
Lock your safe
  • Close the door and turn the keypad dial counterclockwise to lock your safe
 
Upon Check out
  • We will be sad to see you go, but when you do – please leave your safe open so the codes can be reset for the next guest